Clutch Bleeding

[paulh]

Had my clutch done recently but been having a few problems, stuff like the pedal moving under my foot, sticking in gear. Seems a fairly common problem from reading threads on here and the general opinion is that a good bleed with a pressure kit is the way to go.

Iv'e been out and bought a Gunsons Eezi-bleed, but before I get stuck in is there anything that I need to know, or is it just as simple as hook it up and open the bleed nipple?

Cheers

[chrispb123456]

Hi You shouldn't have any problems, if thats the one that you connect to a wheel for the air pressure make sure you reduce the pressure to 15 psi max, or you risk blowing the reservoir off the cylinder, also when you're finished, remove a little fluid from the reservoir as they usually leave it full to the brim. ;)